100x83.4mm

View Size.

5-13

Shade Control.

4 Arc Sensors

Constantly monitor the arc.

External GRIND Button

Easy access when grinding.

BINZEL 24 Style MIG Torch Consumable Starter Kit

Packaged in a sturdy carry case, the BINZEL 24 Style MIG Torch Consumable Starter kit is the perfect companion to be bundled alongside machines, with the kit containing all the essential consumables.

CONTENTS:

• 1 x MIG Pliers (UMMP)
• 2 x Conical Nozzles (PGN24CON)
• 2 x Tip Holders (PCTH24)
• 2 x Gas Diffusers (PCGD24)
• 10 x 0.8mm Contact Tips (PCT0009-08)
• 10 x 0.9 Contact Tips (PCT0009-09)

We’ve revamped our TIG consumable starter kits! Now more versatile than ever, we’ve included a wider range of sizes for ceramic and quartz cups. Our starter kit now comes with everything you need to get welding across a wide range of applications.

CONTENTS:

• 1 x UMCT2C07 – CERAMIC CUP SIZE 7
• 1 x UMCT2C08 – CERAMIC CUP SIZE 8
• 1 x UMCT2C10 – CERAMIC CUP SIZE 10
• 1 x UMCT2GL16 – GAS LENS COLLET BODY 1.6MM
• 1 x UMCT2GL24 – GAS LENS COLLET BODY 2.4MM
• 1 x UMCT2HG – HEAD GASKET
• 1 x UMCT2SN – HEAT ZONE ISOLATOR
• 1 x UMCT2QZ06 – QUARTZ CUP SIZE 6
• 1 x UMCT2QZ08 – QUARTZ CUP SIZE 8
• 1 x UMCT2QZ10 – QUARTZ CUP SIZE 10
• 1 x UMCT2QZSN – QUARTZ ZONE ISOLATOR
• 2 x TR000516 – Rare Earth Tungsten Electrode 1.6mm
• 2 x TR000524 – Rare Earth Tungsten Electrode 2.4mm
• 1 x UMCT2SBC – SHORT BACK CAP

ER70S-6 Mild Steel MIG Wire is a high quality, copper-coated, triple de-oxidised solid MIG welding wire precision layer wound plastic spools. The wire contains higher levels of manganese and silicon than most standard grades of MIG wire to produce high-quality welds. The high silicon content increases the fluidity of the weld pool creating a smoother bead appearance and resulting in minimal post-weld grinding. The wire is engineered to provide porosity-free, x-ray quality welds with high tensile strength. ER70S-6 Solid MIG Wire requires a shielding gas such as CO² or Argon/CO² mixes.

Classification:

AS/NZS 2717.1:ES6 – CG – W503H

Approvals:

• CANADIAN WELDING BUREAU.

UNIMIG 5356 Aluminium TIG Welding Rods are a triple shaved TIG wire for the purpose of welding cats and wrought aluminium and specifically the 3000, 5000 & 6000 series. 5356 is sometimes referred to as “marine grade” because it is widely used in the marine industry and it’s very commonly found in general fabrication applications as well. The major element in 5356 wire is 5% magnesium. The wire has excellent weldability and corrosion resistance. The wire is packaged in 1kg & 5kg tubes.

Approvals:

• ABS, BV, CE & DNV

UNIMIG 316L Stainless TIG Welding Rods are a high-quality low carbon TIG wire used for TIG welding 316 and 316L stainless steel alloys. UNIMIG 316L is also suitable for welding other 300 grade stainless steels such as 302 and 304 grades. This particular rod can also be used for gas (oxy/acetylene) welding and is available in 1kg & 5kg tubes.

Classification:

• AWS/ASME SFA 5.9 ER316L
• DIN8556 WSG-2 Cr Ni Mo 1912
• EN1272 W19123 L
• M.No. 1.4430

Approvals:

• TUV Nord • DB • CWB

The Rogue Heavy Duty Welding Gloves are built for high heat and intensity MIG welding and plasma cutting. These gloves meet the EN 388 and EN 407 safety standards.

• Heavy-duty internal fleece lining
• Reinforced double layered palm and thumb
• Durable split cowhide leather

Standards:

• EN 388
• EN 407
• AS/NZS 2161.2:2020
• AS/NZS 2161.3:2020
• AS/NZS 2161.4:1999

Maintain complete control over your TIG welds with the Rogue TIG Gloves. These gloves meet the EN 388 and EN 407 safety standards.

• Unlined for maximum feedback, these gloves have a 5/5 dexterity score
• The reinforced heat-guard side patch helps with reducing hand fatigue
• Made from premium grain goat leather

Standards:

• EN 388
• EN 407
• AS/NZS 2161.2:2020
• AS/NZS 2161.3:2020
• AS/NZS 2161.4:1999

MACHINE SPECIFICATIONS

AC/DC High Frequency TIG

 

TIG weld aluminium without issues with AC. High-Frequency TIG (H/F TIG) gives you more control when starting or stopping the arc and reduces the risk of contaminating the tungsten or the weld. The RAZOR MULTI 230 AC/DC can also Pulse TIG in both AC & DC.

 

DUAL PLUG COMPATIBILITY (10A & 15A)

 

Connect to any 10A or 15A outlet for even greater versatility. The machine comes plugged with a 15A plug, so to connect to a 10A outlet simply attach the supplied conversion lead to your machine and change your output mode on the machine. In 10A mode the output is limited to 200A, and the duty cycle is limited to 10% at 200A.

 

Power Factor Correction (PFC)

 

PFC gives you maximum electrical efficiency and automatically compensates for any voltage fluctuation.

 

MIG Smart-Set

 

Setting up for a weld has never been easier, just set your wire, gas, joint type and material thickness and you’re ready to weld!

 

Complete MIG Weld Cycle Control

 

Get complete control over your MIG welds with a full set of adjustable parameters. It comes with the standard settings like as pre- and post-gas flow, arc ignition speed, and burnback. Plus it also includes more advanced features, like Arc Start and Crater Fill, for full control over the beginning and end of your welds.

 

Geared Wire Drive

 

This machine features a geared roller drive unit, providing consistent and smooth wire feed, and it helps when using longer MIG torches.

 

TIG Smart-Set

 

The easiest way to set up for a TIG weld, simply set your filler material, joint type and material thickness and you’re good to go!

 

Mix AC/DC

 

Mixed AC/DC welding is the combination of TIG AC and TIG DC- in one weld. Mixed AC/DC gives you faster welding speeds, better penetration, a faster weld puddle on cold workpieces, and you can weld on thicker materials.

 

Heat Control Trigger (HCT) Mode

 

When using the Heat Control Trigger Mode lets you set a base current, which you can switch to at any time during a weld by pressing the trigger button. Heat Control Trigger Mode is great for manual heat input control as you go.

 

PULSE MMA (STICK)

 

Pulse MMA (STICK) welding helps reduce spatter, improves heat control and allows for an easier removal of slag. It also improves the speed and efficiency of vertical up welds by eliminating the use of the “Christmas Tree” technique, while still maintaining root fusion.

PRIMARY INPUT VOLTAGE

240V Single Phase

SUPPLY PLUG

15 AMP (15A to 10A Conversion Lead Included)

Ieff (A)

9.4 / 15

RATED OUTPUT

25A/15.3V-200A/24V (10A) 25A/15.3V-230A/25.5V (15A)

PROTECTION CLASS

IP21

INSULATION CLASS

H

MINIMUM GENERATOR (kVA)

8.5 (10A) / 10 (15A)

DINSE CONNECTOR

35/50

STANDARD

AS/NZ60974-1

SUITABLE MATERIAL

Mild Steel, Stainless Steel, Cast Iron, Silicon Bronze, Aluminium, Copper

WARRANTY (Years)

3

MIG Specifications

MIG WELDING CURRENT RANGE

25-200A (10A) / 25-230A (15A)

MIG DUTY CYCLE @ 40°C

10% @ 200A, 60% @ 81A, 100% @ 63A (10A) / 25% @ 230A, 60% @ 187A, 100% @ 145A (15A)

MIG WIRE SIZE RANGE

0.6-1.0mm

MIG WIRE SPOOL SIZE

100mm / 200mm

MIG WELDING THICKNESS RANGE

1-10mm

DRIVE ROLLER SIZE

30/22

TIG SPECIFICATIONS

TIG FUNCTION TYPE

AC/DC High-Frequency

TIG WELDING CURRENT RANGE

10-200A

TIG DUTY CYCLE @ 40°C

25% @ 200A, 60% @ 130A, 100% @ 100A (10/15A)

TIG WELDING THICKNESS RANGE

1-8mm

STICK SPECIFICATIONS

STICK WELDING CURRENT RANGE

10-200A

STICK DUTY CYCLE @ 40°C

10% @ 200A, 60% @ 81A, 100% @ 63A (10A) / 25% @ 200A, 60% @ 130A, 100% @ 100A (15A)

STICK ELECTRODE RANGE

2.5-4.0mm

STICK WELDING THICKNESS RANGE

2-12mm

ARC FORCE

0-100%

Size & Weight

DIMENSIONS (mm)

660x210x330mm

WEIGHT (kg)

20kg

MACHINE FEATURES

WIRE DRIVE

Geared

VRD

Yes

SPOOL GUN CONNECTION

Yes

FOOT CONTROL CONNECTION

Wired & Wireless

BURNBACK ADJUSTMENT

Yes

WIRE INCH

Yes

INDUCTANCE CONTROL

Yes

CRATER CURRENT CONTROL

Yes

THERMAL OVERLOAD PROTECTION

Yes

UNIMIG is pleased to offer a 3-year warranty on all RAZOR™ Machines*.

UNIMIG offers warranty across Australia with four UNIMIG service centre’s in Sydney, Melbourne, Brisbane & Perth. We also have authorised service centres across Australia as well. UNIMIG’s focus is to assure the buyer is getting reliability, performance and peace of mind with a quality product.

UNIMIG also offers an additional 6 months warranty free of charge when you register your product online via the UNIMIG website.

*Please note warranty only applies to the power source only